Timber in Architecture Special Supplement

Timber is one of the most sustainable building materials known to man, it has incredible strength and integrity and as can be seen around the world has been specified in a wide variety of construction projects.

 

Externally wood can provide a stunning finish to any exterior and internally it’s qualities add a richness that is hard to match given the products green credentials. This is why we feel a timber magazine was an essential edition to our collection of construction magazines.

 

Timber in Architecture will be edited by Ruth Slavid who has a deep knowledge and understanding of wood and it’s use in construction.

 

The magazine will also carry a wood directory where timber species can be sourced and located, this section will be further enhanced on the forthcoming website which we are planning to launch later in the year.

Timber in Architecture Supplement Published May & Nov 2011

 

Timber is a material whose time has come, thanks to its tactile, warm qualities, its strong environmental credentials, and its variable and local nature. It remains one of the most sustainable products specified across the construction sector.

 

Its use in contemporary and historic buildings across both the domestic and commercial sector is renowned.

 

Each supplements will cover:

• Exciting buildings in timber

• Advances in prefabrication

• Sustainability and sourcing

• Timber in interiors

• Timber in existing buildings

 

Each Timber in Architecture supplement will report on the latest trends and thinking about the use of of wood in architecture, discuss and challenge the negative press that wood often recieves particularly in relation to fire as well as look at a range of aspects to do with wood specification including:

 

Interesting buildings in timber from around the world

Wood awards from around the globe

Advances in prefabrication

Sustainability and sourcing

The use of timber in interiors

Refurbishment

 

The Timber in Architecture supplements will be supported by dedicated website www.timberinarchitecture.com which will be going live during 2011.

Timber in Architecture magazine will initially run as a bi-annual special supplement to Specification magazine. During 2012, we intend to increase its frequency and become a stand alone title.

 

Published initially in May and November 2011, the supplement will be mailed to the full ABC audited 18350 print circulation of Specification magazine. In addition, it will also be produced as a stand-alone digital magazine and emailed to over 11440 specifiers who have either been identified as working on a project where timber has been specified, are involved in the engineering, specification or procurement of timber products or have specified that they wish to receive the publication in this format.

Circulation Analysis	Print	Digital
Architects (Including architectural technologists and technicians)	10826	7429
Building Contractors, House Builders & Developers	2898
Quantity & Building Surveyors	1427
Project Managers & Directors	1025	189
Structural, Mechanical & Electrical Engineers	1076	523
Directors & Clients	948
Interior Designers	150
Design & Build Manager		56
CDM Co-ordinator		12
Main Contractor		3231
Sub Total	18350	11440
TOTAL	29790

ADVERTISEMENT RATES	1 Insertion	3 Insertions	6 Insertions	10 Insertions
DPS	£4000	£3600	£3200	£2800
Full Page	£2000	£1800	£1600	£1400
Half Page	£1000	£900	£800	£700
Quarter Page	£500	£450	£400	£350
Literature Panel (Linked to the Building Product Library)	£300	£275	£250	£225
SPECIAL POSITIONS
Corporate Spread	£5000 (Includes editorial spread)
Front Cover	£2500 (Includes full page article)
Back Cover	£2300	£2100	£1900	£1700
Inside Front Cover	£2200	£2000	£1800	£1600
Inside Back Cover	£2100	£1900	£1700	£1500

Dimensions (MM)	Trim	Bleed	Gutter
DPS	460w x 306h	466w x 306h	36m
Full Page	230w x 300h	236w x 306h
Half Page Horizontal	200w x 125h
Half Page Vertical	90w x 260h
Quarter Page (Vertical)	90w x 125h
Quarter Page (Horizontal Strip)	200w x 65h

Series and volume discounts available on request, contact your account manager for further details.

PR Product and Project Releases

All editorial submitted for inclusion within the products in focus section of the magazine levies a production charge of £99.00

(Please forward any relevant press material together with hi-resolution photography to our editorial coordinator Katie Wilcox on katie@tspltd.co.uk)

OTHER OPPORTUNITIES

Inserts are available. Prices are based on weight and quantity. For more details on tip-ons, gatefolds, and bellybands please contact your account manager.

Email material to: copy@tspltd.co.uk

Material must be supplied on Mac readable discs or via email or FTP.
PDF’s should be print ready with all fonts and images embedded (min 300dpi).
Documents must be Quark Xpress.
Images must be saved as TIFF or EPS minimum 300dpi at 100% size.
Ensure all images are CMYK not RGB.
Ensure all colours are CMYK not RGB or SPOT including Illustrator files.

Artwork requiring further production may levy further charges which will be pre-quoted prior to implementation.

Cancellations in writing by the first working day of the month prior to the month of publication as our standard terms and conditions of sale state.

Click on the front cover of your chosen publication below to view it online.